Kurlax Motorized Blackout Zebra Shades – StriaWeave

Inside Mount

1. Width: Measure at the top, middle, and bottom. Use the smallest measurement.
2. Height: Measure at the left, middle, and right. Use the smallest measurement.
3. Depth: A minimum depth of 1 3/4" (4.5 cm) is required for installation. At least 3 3/8" (8.5 cm) is needed for a fully recessed headrail. Check for obstructions such as handles or locks.

⚠️ Please Note:

1. Size Deduction: Enter actual window opening measurements without deductions. We will automatically deduct approximately 3/16" (5 mm) from the width during production. No height deduction applies.
2. Fabric Width: Approximately 1 1/16" (2.7 cm) narrower overall than the finished headrail width, leaving gaps along both sides.

Outside Mount

Measure the area you want your shade to cover.

1. Width: Measure the window opening at the top, middle, and bottom, then use the largest measurement. Add your desired overlap on both sides to improve coverage and help minimize light gaps.
2. Height: Measure from the intended mounting position above the window to the desired bottom of the shade.
3. Mounting Requirement: At least 1 1/2" (3.8 cm) of available mounting space above the window opening is required.

⚠️ Please Note:

Fabric Width: The fabric is approximately 1 1/16" (2.7 cm) narrower overall than the finished headrail width. Account for this difference when determining the desired coverage width.